Renz DTP 340A - Semi-Automatic Punching System
(watch
the video demo 7.0mg)
The most expensive part of any punching system is the operator and this is
where the DTP 340A introduces a whole new concept to tabletop punching. The
operator loads the sheets, and then the machine punches and removes the
sheets automatically. This effectively doubles the punching output of the
machine - at a fraction of the cost of a fully automatic machine. Difficult
types of paper, like tabs or folded sheets, are handled easily and a manual
mode is provided for sheets that can't be punched automatically. Pages
are removed automatically to double the output of the machine. Electronic
centring adjustment is used to centre the pages on the die so setup is very
simple and accurate. 2 machines in one. Automatic or manual mode - you
choose. Paper stand holds the paper close to the die opening to reduce
movement. Easy die change. The die is secured with quick release screw on
either end of the machine. Handles are built in for easy removal. Instant
pin selection. Externally selectable pins for fast changes in paper size.
A
n example of how you can save money:
Punching books in A4 format, 60 sheets of 80gsm, you can produce:-
Traditional Punching
Approximately 70 to 100 books/hour
DTP340A
Approximately 300 to 350 books/hour
Specifications
| Max Page Size |
Up to 34 cm |
| Disengaging Punch Pins |
Yes |
| Punching Thickness |
Up to 35 sheets |
| Adjustable Edge Distance |
Yes |
| Maximum Binding Size |
N/A |
| Number of Rings |
Depends on punching die |
| Power |
230 V, 50Hz / 300 W |
| Dimensions |
(881 mm x 640 mm x 381 mm) |
| Shipping Weight |
54 kg |
|
Need Wires?
Need Covers?
Enquire about this product
Sydney:
02 8004
2111
